Surgery Product

Filling Materials

Diamond Micro Luting Cement Capsules

Diamond Micro Luting Cement Capsules | Filling materials

Diamond Micro Luting Cement is a resin-reinforced chemical - cure glass ionomer for permanent cementation. Fields of application are porcelain-fused-to-metal crowns, bridges on hard dental tissue and cores rebuilt with amalgam, composite or glass ionomer cements plus metal inlays, onlays, crowns and bridges, posts, crowns manufactured from alumina only or zirconia only cores and orthodontic appliances.

Code Name Unit Price (excl. VAT) Add to Order
SUN545 Diamond Micro Luting Cement Capsules Box/20 £32.30

Benefits

  • Resin-reinforced glass ionomer cements are well suited for luting high-strength ceramic crowns. Full ceramic crowns based on zirconium oxide and other similar materials are often used in prosthetic treatment, due to their excellent mechanical properties and aesthetic appearance.
  • Easy Handling
  • Low solubility in the mouth
  • High adhesion, low linear expansion, superior marginal integrity.
  • Chemical cure
  • Micro-fine powder allows an extremely thin film thickness for perfect fit and occlusal accuracy.
  • High fluoride release, good biocompatibility
  • Easy to remove excess material.

Indications

  • Porcelain fused to metal crowns, ridges on hard dental tissue and on cores with amalgam, composite or glass ionomer cements
  • Metal inlays, onlays, crowns and bridges
  • Posts
  • Crowns manufactured from aluminaonly or zirconia-only cores
  • Orthodontic appliances

Instructions for use

figure 1. Capsules must be activated for a minimum of 10 seconds before you can use them.

Step 1. Diamond Micro Luting Cement Capsules must be activated for a minimum of 10 seconds before you can use them. When you activate a capsule you are adding the liquid to the powder. Place the capsule in the activator clamping device and clamp the capsule saddle to release the liquid, ensuring that the capsule top does not turn clockwise at this stage.

figure 2. Fix the activated capsule in a capsule mixer and mix for approximately 5 - 10 seconds at ~3000 rpm.

Step 2. Fix the activated capsule in a capsule mixer and mix for approximately 5 - 10 seconds at ~3000 rpm.

figure 3. open the capsule by twisting the dispensing nozzle through 180o

Step 3. You must open the capsule by twisting the dispensing nozzle through 180o before you can dispense the mixed material.

figure 4. Fix the mixed capsule into the gun.

Step 4. Fix the mixed capsule into the gun. Place the Diamond Micro Luting Cement Capsule material directly into the prepared cavity, adjusting the capsule direction as required.